ODL 17069000R Guia de Instalação descarregar pdf (Página 16)

Ladder

Pencil/Marker

Safety Equipment

Shim

Bottom Adjustable Tube

TOOLS & PARTS

Place bottom adjustable tube (with the ﬂanged end

down) through the rough-cut hole in the ceiling.

Guide the top portion of the tube up through the

roof ﬂashing so it protrudes upward through the

ﬂashing collar on the roof.

Place a temporary shim or ruler across the ceiling opening.

(Approx 1/8” thick)

Center the tube over the ceiling cut-out, resting the

tube down onto the shim. (The shim will keep the

tube from falling through the ceiling.)

Start with regular installation instructions beginning in Section 1.

On the roof, mark the protruding tube at the top of the

ﬂashing collar with a felt pen. This will indicate where

the extra length of tubing must be trimmed off for a

short shaft install.

The solar powered dimmer will not work with a cathedral

ceiling or some short installations due to space restrictions.

NOTE

Section-10a

Cathedral Ceiling/Short Shaft Installation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

Sem comentários

ODL 17069000R Guia de Instalação Página 16